Alertes SNMP

Pour que les alertes SNMP fonctionnent correctement, veuillez autoriser la plage d’adresses IP suivante dans les paramètres de votre pare-feu : 8.29.56.0/24

L’alerte Simple Network Management Protocol (SNMP) envoie un piège SNMP à une console de gestion SNMP ou à un serveur. Cette option intègre les alertes Dotcom-Monitor directement dans un système de gestion informatique, de sorte que les alertes sont traitées et acheminées comme toute autre alerte au sein d’une entreprise. Actuellement, Dotcom-Monitor® prend en charge SNMP v1, v2 et v3.

Dotcom-Monitor dispose d’un OID d’entreprise enregistré, qui est 31201. Les alertes sont envoyées en tant que type Enterprise, ce qui est la valeur six. Pour un bit personnalisé, une alerte d’erreur est une valeur; une alerte de disponibilité est la valeur deux; une alerte de test est la valeur trois.

Les alertes sont envoyées par Internet sur un port SNMP standard.

Dotcom-Monitor piège MIB fichier pour SNMP v1

-- Dotcom-Monitor Inc
-- Private Enterprise MIB definition
-- 09/02/2015

--Dotcom-Monitor Support
--Postal: 5125 County Road 101, Suite 100
-- Minnetonka, MN 55345
-- USA
--
-- Tel: 888-479-0741; Fax: 888-794-3554
--
-- E-mail: Support@Dotcom-Monitor.Com


-- This file describes the Dotcom-Monitor Inc Enterprise MIB.
-- It includes object identifiers and object definitions for the
-- Dotcom-Monitor Inc only, and should be used for compilation by a management
-- tool in order to extend the tool to support the Dotcom-Monitor Inc MIB.

DOTCOM-MONITOR-MIB DEFINITIONS ::= BEGIN

IMPORTS
TRAP-TYPE
FROM RFC-1215
DisplayString
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212
TimeTicks, enterprises
FROM RFC1155-SMI;

-- tree structure

dotcom-monitor OBJECT IDENTIFIER ::= { enterprises 31201 }
variables OBJECT IDENTIFIER ::= { dotcom-monitor 255 }
-- variables

notificationInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Information about the source of the notification."
::= { variables 1 }

deviceId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Device ID."
::= { variables 4 }

deviceName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Device name."
::= { variables 5 }

firstErrorCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First error code."
::= { variables 6 }

firstErrorDscr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error code description."
::= { variables 7 }

errorFirstConfirmed OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date-Time when the error occurred."
::= { variables 8 }

errorFirstConfirmedType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error type."
::= { variables 9 }

errorFirstConfirmedLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error location."
::= { variables 10 }

-- Generic Traps

error TRAP-TYPE
ENTERPRISE dotcom-monitor
VARIABLES {
notificationInfo,
deviceId,
deviceName,
firstErrorCode,
firstErrorDscr,
errorFirstConfirmed,
errorFirstConfirmedType,
errorFirstConfirmedLocation
}
DESCRIPTION "This indicates that the trap contains info about Device Errors"
::= 1

uptime TRAP-TYPE
ENTERPRISE dotcom-monitor
VARIABLES {
notificationInfo,
deviceId
}
DESCRIPTION "This indicates that the trap contains info about Device Uptime"
::= 2

test TRAP-TYPE
ENTERPRISE dotcom-monitor
VARIABLES {
notificationInfo,
deviceId
}
DESCRIPTION "This is the trap that used for test purposes only."
::= 3

event TRAP-TYPE
ENTERPRISE dotcom-monitor
VARIABLES {
notificationInfo,
deviceId
}
DESCRIPTION "This indicates that the trap contains info about Device Events"
::= 4

END

Dotcom-Monitor piège MIB fichier pour SNMP v2

 -- Dotcom-Monitor Inc
 -- Private Enterprise MIB definition
 -- 09/02/2015

 --Dotcom-Monitor Support
 --Postal: 5125 County Road 101, Suite 100
 --        Minnetonka, MN 55345
 --        USA
 --
 --        Tel: 888-479-0741; Fax: 888-794-3554
 --
 --        E-mail: Support@Dotcom-Monitor.Com


 -- This file describes the Dotcom-Monitor Inc Enterprise MIB.
 -- It includes object identifiers and object definitions for the 
 -- Dotcom-Monitor Inc only, and should be used for compilation by a management
 -- tool in order to extend the tool to support the Dotcom-Monitor Inc MIB.  

    DOTCOM-MONITOR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, TimeTicks, enterprises 
                FROM SNMPv2-SMI
        DisplayString
                FROM SNMPv2-TC
    OBJECT-GROUP, NOTIFICATION-GROUP
                FROM SNMPv2-CONF;
dotcomMonitorMIB MODULE-IDENTITY
        LAST-UPDATED "202011100000Z"
        ORGANIZATION "Dotcom-Monitor."
        CONTACT-INFO
                "Dotcom-Monitor Inc

Postal: 5125 County Road 101, Suite 100
        Minnetonka, MN 55345
        USA

        Tel: 888-479-0741; Fax: 888-794-3554

        E-mail: Support@Dotcom-Monitor.Com"
        DESCRIPTION
                "The MIB module for Dotcom-Monitor.Com"
        REVISION "202011100000Z"
        DESCRIPTION
                "Added deviceId, deviceName, firstErrorCode, firstErrorDscr, errorFirstConfirmed, errorFirstConfirmedType, errorFirstConfirmedLocation."
        REVISION "202010220000Z"
        DESCRIPTION
                "Initial version of this MIB."
        ::= { enterprises 31201 254 }

dotcommonitor	OBJECT IDENTIFIER ::= { enterprises 31201 }
variables	OBJECT IDENTIFIER ::= { dotcommonitor 255 }
  
  notificationInfo OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Information about the source of notification."
    ::= { variables  1 }

  deviceId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Device ID."
    ::= { variables  4 }

  deviceName OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Device name."
    ::= { variables  5 }

  firstErrorCode OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "First error code."
    ::= { variables  6 }

  firstErrorDscr OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Error code decription."
    ::= { variables  7 }

  errorFirstConfirmed OBJECT-TYPE
    SYNTAX  TimeTicks
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Date-Time when the error occurred."
    ::= { variables  8 }

  errorFirstConfirmedType OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Error type."
    ::= { variables  9 }

  errorFirstConfirmedLocation OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
     "Error location."
    ::= { variables  10 }
   
    -- Generic Traps
    
    error	NOTIFICATION-TYPE
        OBJECTS         { 
                        notificationInfo,
                        deviceId,
                        deviceName,
                        firstErrorCode,
                        firstErrorDscr,
                        errorFirstConfirmed,
                        errorFirstConfirmedType,
                        errorFirstConfirmedLocation
                        }
        STATUS current
    DESCRIPTION	"This indicates that the notification contains info about Device Errors"
    ::= {dotcommonitor 1}
    
    uptime	NOTIFICATION-TYPE
        OBJECTS         { 
                        notificationInfo,
                        deviceId
                        }
        STATUS current
    DESCRIPTION	"This indicates that the notification contains info about Device Uptime"
    ::= {dotcommonitor 2}
    
    test	NOTIFICATION-TYPE
        OBJECTS         { 
                        notificationInfo,
                        deviceId
                        }
        STATUS current
    DESCRIPTION	"This is the notification that used for test purposes only."
    ::= {dotcommonitor 3}

    event	NOTIFICATION-TYPE
        OBJECTS         { 
                        notificationInfo,
                        deviceId
                        }
        STATUS current
    DESCRIPTION	"This indicates that the notification contains info about Device Events"
    ::= {dotcommonitor 4}


dotcomBasicGroup    OBJECT-GROUP
    OBJECTS { notificationInfo, deviceId
            }
    STATUS  current
    DESCRIPTION
            "Contains data structures used in notifications."
    ::= { variables 3 }

dotcomNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS { event, uptime, error, test }
    STATUS        current
    DESCRIPTION
            "The notifications of events relating to Dotcom-Monitor monitoring process."
    ::= {variables 2}
    
    
END

exemple

//Downtime message
community=public, enterprise=1.3.6.1.4.1.31201, uptime=02:28:28, agent_ip=207.250.234.88, generic_num=6, specificTrap_num=1, specificTrap_name=, version=Ver1, 1.3.6.1.4.1.31201.1="Dvc:ServerView Check;Tsk:timeanddate.com;Loc:Dallas;Err:400;Dsc:Invalid keyword(s). Not found: ':01:', ':02:', ';3/23/2021 10:28:24 ", 1.3.6.1.4.1.31201.255.1="Dvc:ServerView Check;Tsk:timeanddate.com;Loc:Dallas;Err:400;Dsc:Invalid keyword(s). Not found: ':01:', ':02:', ';3/23/2021 10:28:24 ", 1.3.6.1.4.1.31201.255.4=160290, 1.3.6.1.4.1.31201.255.5="ServerView Check", 1.3.6.1.4.1.31201.255.6=400, 1.3.6.1.4.1.31201.255.7="Invalid keyword(s). Not found: ':01:', ':02:', ':03:', ':04:', ':05:', ':11:', ':12:', ':13:', ':14:', ':15:', ':21:', ':22:', ':23:', ':24:', ':25:', ':31:', ':32:', ':33:', ':34:', ':35:', ':41:', ':42:', ':43:', ':44:', ':45:', ':51:', ':52:', ':5", 1.3.6.1.4.1.31201.255.8=1616513304, 1.3.6.1.4.1.31201.255.9=Validation, 1.3.6.1.4.1.31201.255.10=Dallas

//Uptime message
community=public, enterprise=1.3.6.1.4.1.31201, uptime=02:41:30, agent_ip=207.250.234.88, generic_num=6, specificTrap_num=2, specificTrap_name=, version=Ver1, 1.3.6.1.4.1.31201.2="Device: ServerView Check back online at 3/23/2021 10:41:26 AM Location: Dallas", 1.3.6.1.4.1.31201.255.1="Device: Server View Check back online at 3/23/2021 10:41:26 AM Location: Dallas", 1.3.6.1.4.1.31201.255.4=160290

Alertes SNMP

Dotcom-Monitor piège MIB fichier pour SNMP v1

Dotcom-Monitor piège MIB fichier pour SNMP v2

Solutions

fonctionnalités

Société